HANNA Phosphate Low Range Handheld Colorimeter
Ideal for:
- Ponds
- Aquaculture
- Natural, waste, agricultural and drinking waters
Orthophosphates are found in natural waters and wastewaters. They are commonly added to drinking water as a corrosion inhibitor. The instantaneous analysis of orthophosphates by colorimetric determination provides rapid results using a standard analysis technique.
Ideal for coral reef tanks and fresh and salt water aquariums
Phosphate directly inhibits calcification by corals and coralline algae - even at low levels. The health of plants in freshwater aquaria will also be impaired by raised levels of phosphate in the water. Phosphate naturally occurs as waste decomposes in coral reef, salt and fresh water aquariums. While it does not directly harm fish when levels are high, resulting green algae growth can deplete the oxygen levels in water. Corals can lose their colour due to the effects of brown algae.
The optimum phosphate level - particularly for reef tanks - is often quoted as zero or 0.05 mg/L (ppm).
With its ability to register the presence of phosphate in salt and fresh water at extremely low levels, the new Hanna Phosphate Checker offers a real 'must-have' addition to the fish lover's equipment chest.
Main Benefits
- Testing is quick and easy
- High precision results - more accurate than chemical test kits
- Auto shut-off feature means the Checker cannot be left on by mistake
- Fully portable, fitting easily into both palm and pocket
- Fits nicely into your palm or pocket
Ideal for
- Coral reef tanks
- Salt water aquarium
- Fresh water fish keeping
Four steps. One click. Instant Readout.
1. ‘Zero’ the Checker®HC with your vial & 10ml water sample inside
2. Take the vial out and add your reagent
3. Place your vial into your Checker®HC
4. Press the button and read the results
Use Reagents HI-713-25 with the HI-713 Phosphate Low Range Handheld Colorimeter - Checker®HC, x 25 tests
Use Calibration Check Set HI-713-11 with the HI-713 Phosphate Low Range Handheld Colorimeter - Checker®HC.
Specifications
Specifications list
Specifications
Range | 0.00 to 2.50 ppm (mg/L) | |
Resolution | 0.01 ppm (mg/L) | |
Precision | ±0.04 ppm (mg/L) ±4% of reading @ 25°C | |
Light Source | LED @ 525 nm | |
Light Detector | Silicon photocell | |
Environment | 0 to 50°C (32 to 122°F); RH max 95% non-condensing | |
Battery Type | (1) 1.5V AAA | |
Auto-off | After 2 minutes of non-use and after read | |
Dimensions | 81.5 x 61 x 37.5 mm (3.2 x 2.4 x 1.5”) | |
Weight | 64 g (2.25 oz.) | |
Method | Adaptation of Standard Method 4500-P E. |
PLEASE NOTE: | In some cases, samples may contain other parameters which may interfere with results | |
Interference may be caused by: | Iron above 50 mg/L Silica above 50 mg/L Silicate above 10 mg/L Copper above 10 mg/L Hydrogen sulphide, arsenate, turbid sample and highly buffered samples also interfere. |