HANNA Ammonia High Range Handheld Colorimeter
The HI-733 Checker is a simple, accurate, and cost effective way to measure high ranges of ammonia in fresh water.
Designed as a more accurate alternative to chemical test kits, the HI-733 provides quick, accurate results in four easy steps.
The HI-733 uses an adaptation of the ASTM Manual of water and Environmental Technology D1426-92, Nessler Method. The reaction between ammonia and reagents causes a yellow tint in the sample.
Ideal for:
- Water Quality
- Education
- Wastewater
- Freshwater Aquariums
- Environmental
Features
- Palm-sized design
- ±1.0ppm ±5% of reading
- Dedicated to a single parameter
- Uses a single AAA battery
- Auto Power Off after 10 minutes in inactivity
- Built-in timer for timed reaction readings
Four steps. One click. Instant Readout.
1. ‘Zero’ the Checker®HC with your vial inside
2. Place a 10ml water sample into the vial and add your reagent
3. Place your vial into your Checker®HC
4. Press the button and read the results
Battery powered – Allows use away from a power source. Batteries are included with all battery operated products.
Use reagents HI-733-25 with the HI-733 Ammonia High Range Colorimeter Checker®HC, x 25 tests.
Use Calibration Check Set HI-733-11 with the HI-733 Ammonia High Range Colorimeter Checker®HC.
Specifications
Specifications list
Specifications
| Range | 0.0 to 99.9 ppm as NH4+ | |
| Resolution | 0.1 ppm | |
| Accuracy (@20°C/68°F) | ±1.0ppm ±5% of reading | |
| Measurement Method | Colorimetric | |
| Light Source | LED @470 nm | |
| Light Detector | Silicon photocell | |
| Method | Adaptation of the ASTM Manual of water and Environmental Technology D1426-92, Nessler Method. The reaction between ammonia and reagents causes a yellow tint in the sample. | |
| Power Supply | Battery - 1 x 1.5V AAA | |
| Power Auto Off | After 10 min. of inactivity | |
| Environment | 0 to 50°C (32 to 122°F); RH max 95% non-condensing | |
| Dimensions | 81.5 x 61 x 37.5 mm (3.2 x 2.4 x 1.5”) | |
| Weight | 64 g (2.25 oz.) | |
| Ordering information: | Supplied with sample cuvettes with caps (2), Ammonia HR reagent starter kit (reagents for 10 tests), syringe with tip, plastic pipette, battery, instructions and quick start guide. |
| PLEASE NOTE: | In some cases, samples may contain other parameters which may interfere with results | |
| Interference may be caused by: | Acetone Alcohols Aldehydes Glycine Hardness above 1 g/L Iron Organic chloramines Sulphide Various aliphatic and aromatic amines |