June Payday Offers

Showing 25–36 of 44 results

Sale!
EazyPod
Original price was: £549.95.Current price is: £479.95.
EazyPod
Original price was: £549.95.Current price is: £479.95.

Easy to use filter system

A compact member of the Nexus family, the Eazy Pod is a mechanical and biological filter system for ponds up to 10,000 litres.
The EasyPod utilises 18 litres of static K1 Micro, which provides enhanced biological benefits, even when using the Easy Pod solely as a mechanical waste filter.
Available in Grey or Granite Green colours.

Overview

A compact member of the Nexus family, the EazyPod is a mechanical and biological filter system for ponds up to 10,000 litres. The EazyPod utilises 18 litres of static K1 Micro, which provides enhanced biological benefits, even when using the EazyPod solely as a mechanical waste filter. Also available as EazyPodAir models, which come supplied with AirPump70 Kit.

Specifications

Dimensions

How the EazyPod works

Water from the pond enters the EazyPod via the inlet and then flows around the circumference of the outer chamber of the EazyPod, passing through the stainless steel grill causing many of the larger solids to be filtered out and settle in the base of the outer chamber. This is the first stage of mechanical filtration. As water enters the central chamber, through the stainless steel grill, the fine smaller solids become trapped in the mass of K1 Micro. Bio-films build up on the protected surface area within each piece of media, allowing biological filtration to take place. After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe and flows back to the pond via the outlet. The EazyPod is incredibly simple to clean. The connected air pump is used during the cleaning cycle to agitate the K1 Micro to free up any debris and waste that has built up within the filter. A 70 litre per minute air pump is recommended for use during the cycle cleaning. *Only EazyPodAir and EazyPod Complete models are supplied with a 70 litre per minute air pump and accessory kit.

Installing the EazyPod

PUMP-FED INSTALLATION

By this we mean that if your pump is going to be used to supply the water to the filter, and the filtered water then returns back into your pond via gravity, i.e. down a waterfall, or through a large diameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump).

GRAVITY-FED INSTALLATION

*User modification is required on the EazyPod to enable Gravity Fed installation. By this we mean that your pump is going to be used to return the filtered water to the pond and therefore your filter will be supplied by gravity via a larger diameter pipe. In this situation the water level in the filter will be at the same level as the pond.

Select options This product has multiple variants. The options may be chosen on the product page
Out of Stock
EazyPod Replacement UV Unit
£89.95
EazyPod Replacement UV Unit
£89.95

This is a genuine Evolution Aqua EazyPod Replacement UVC Unit for use with the Evolution Aqua EazyPod UV Automatic and EazyPod Complete models, comes complete with ballast, quartz and 18w bulb.

Read more
Sale!
EazyPod Air (includes Air Pump & Kit)
Original price was: £709.95.Current price is: £675.00.
EazyPod Air (includes Air Pump & Kit)
Original price was: £709.95.Current price is: £675.00.

Easy to use filter system

A compact member of the Nexus family, the EazyPod is a mechanical and biological filter system for ponds up to 10,000 litres.
The EazyPod utilises 18 litres of static K1 Micro, which provides enhanced biological benefits, even when using the EazyPod solely as a mechanical waste filter.
Available in Grey or Granite Green colours.

Overview

A compact member of the Nexus family, the EazyPod is a mechanical and biological filter system for ponds up to 10,000 litres. The EazyPod utilises 18 litres of static K1 Micro, which provides enhanced biological benefits, even when using the EazyPod solely as a mechanical waste filter. This EazyPod Air model, comes supplied with AirPump70 Kit.

Specifications

Dimensions

How the EazyPod works

Water from the pond enters the EazyPod via the inlet and then flows around the circumference of the outer chamber of the EazyPod, passing through the stainless steel grill causing many of the larger solids to be filtered out and settle in the base of the outer chamber. This is the first stage of mechanical filtration. As water enters the central chamber, through the stainless steel grill, the fine smaller solids become trapped in the mass of K1 Micro. Bio-films build up on the protected surface area within each piece of media, allowing biological filtration to take place. After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe and flows back to the pond via the outlet. The EazyPod is incredibly simple to clean. The connected air pump is used during the cleaning cycle to agitate the K1 Micro to free up any debris and waste that has built up within the filter. A 70 litre per minute air pump is recommended for use during the cycle cleaning. *Only EazyPodAir and EazyPod Complete models are supplied with a 70 litre per minute air pump and accessory kit.

Installing the EazyPod

PUMP-FED INSTALLATION

By this we mean that if your pump is going to be used to supply the water to the filter, and the filtered water then returns back into your pond via gravity, i.e. down a waterfall, or through a large diameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump).

GRAVITY-FED INSTALLATION

*User modification is required on the EazyPod to enable Gravity Fed installation. By this we mean that your pump is going to be used to return the filtered water to the pond and therefore your filter will be supplied by gravity via a larger diameter pipe. In this situation the water level in the filter will be at the same level as the pond.

Select options This product has multiple variants. The options may be chosen on the product page
Eazypod Automatic
£769.95
Eazypod Automatic
£769.95

The automatic choice for your garden pond

The EazyPod Automatic is a self cleaning, automatic mechanical and biological filter
system for garden ponds up to 10,000 litres.

A control box fitted to the side of the filter contains an adjustable timer that initiates a cleaning cycle automatically – even when you’re not there!

Overview

Inside the control box, the electronic connector blocks control the automated waste valve,
along with your circulating pump (not included). It even houses an
air pump that kicks in automatically to clean the
K1 Micro media.
Crystal clear, healthy water is achieved by the filter which is powered by a static bed of K1
Micro, which also provides enhanced biological benefits too.

Specifications

Dimensions

How the EazyPod Automatic works

The concept of the EazyPod Automatic is simple and yet innovative. Water enters via the inlet and
passes over an 18 watt UV Clarifying bulb (on UV versions ONLY), helping to kill any single celled algae
in the water.

The water then enters the outer chamber, which runs around the entire circumference of the
EazyPod. Between the outer chamber and the inner chamber, there is a stainless steel perforated
screen. These perforations are situated in the lower half of the screen and around its entire face.
This means that when the water passes from the outer to inner chamber,
a downward and upward flow is created. This causes many of the larger solids to settle in the base
of the outer chamber, due to the force of gravity.

The size of the perforations will not allow large mechanical waste to enter the inner chamber,
thus acting as a first stage mechanical filter. The inner chamber holds 18 litres of static K1 Micro
media. As the water enters the inner chamber, the fine smaller solids become entrapped in the K1
Micro. After passing through the K1 Micro, the clean water then rises and overflows into the inner
return pipe. From here it returns to the pond via the return outlet.

The EazyPod Automatic filtration system gives water quality and clarity that surpasses all
expectations. The nature and volume of the K1 Micro means, that when static, apart from being
a very efficient mechanical filter, there is more than enough surface area for beneficial bacteria to
colonise. Therefore on a smaller pond, the EazyPod Automatic is an excellent complete filter.

Installing the EazyPod Automatic

PUMP-FED INSTALLATION ONLY

By this we mean that if your pump is going to be used to supply the water to the filter, and the
filtered water then returns back into your pond via gravity, i.e. down a waterfall, or through a large
diameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump).

Cleaning Cycle

The K1 Micro is cleaned by the integrated air pump located inside the control box, that is connected to the air line in the EazyPod Automatic, which in turn goes to an air ring in the base of the inner chamber. The air ring has small holes in it which causes the K1 Micro to move and therefore clean itself.
During the cleaning cycle, the finer particles escape into chamber from the K1 Micro. This waste water will be automatically dumped via a 1½ inch motorised ball valve.

Cleaning is fully automated on the EazyPod Automatic, and is controlled by a built-in timer, which is factory set at one clean every 3 days, however, this is easily adjustable to fit in with your pond requirements. The EazyPod Automatic will run a cleaning cycle which lasts approximately 6 and a half minutes.

Select options This product has multiple variants. The options may be chosen on the product page
EazyPod cleaning pipe
£9.95
EazyPod cleaning pipe
£9.95
EazyPod cleaning pipe replacement.

Add to cart
Sale!
EazyPod complete (Includes Air Pump +Kit & 18watt UV)
Original price was: £769.95.Current price is: £679.95.
EazyPod complete (Includes Air Pump +Kit & 18watt UV)
Original price was: £769.95.Current price is: £679.95.
Complete filtration with UVC

A compact member of the Nexus family, the EazyPod Complete is a mechanical and biological filter system for garden ponds up to 10,000 litres. The EazyPod Complete utilises static K1 Micro, which provides enhanced biological benefits, even when using the EazyPod Complete solely as a mechanical waste filter. Available in Grey or Granite Green colours.

Integrated 18w UVC

Supplied with AirPump 70 Kit

Ideal for ponds up to 10,000 litres

Very easy to install and operate

Fitted with ½” Slide Valve and Hosetail on Inlet and Waste
Overview

Unlike the EazyPod and EazyPodAir, the EazyPod Complete benefits from having an integrated 18 Watt UVC built in to the inlet section of the filter. This makes it a complete filter system in one, helping to eradicate green water, therefore delivering crystal clear and healthy water for your fish.

Specifications

Dimensions

How the EazyPod Complete works

Water from the pond enters the EazyPod Complete via the inlet, cascading around the 18 Watt UV-C bulb, where any algae will be exposed to the UV-C radiation.

The water then flows around the circumference of the outer chamber of the EazyPod Complete, passing through the stainless steel grill causing many of the larger solids to be filtered out and settle in the base of the outer chamber. This is the first stage of mechanical filtration.

As water enters the central chamber, through the stainless steel grill, the fine smaller solids become trapped in the mass of K1 Micro. Bio-films build up on the protected surface area within each piece of media, allowing biological filtration to take place.

After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe and flows back to the pond via the outlet.

The EazyPod Complete is incredibly simple to clean. The connected air pump is used during the cleaning cycle to agitate the K1 Micro to free up any debris and waste that has built up within the filter.

All EazyPod Complete models are supplied with a 70 litre per minute air pump and accessory kit.

Installing the EazyPod Complete

Water from the pond enters the EazyPod Complete via the inlet, cascading around the 18 Watt UV-C bulb, where any algae will be exposed to the UV-C radiation.
The water then flows around the circumference of the outer chamber of the EazyPod Complete, passing through the stainless steel grill causing many of the larger solids to be filtered out and settle in the base of the outer chamber. This is the first stage of mechanical filtration.
As water enters the central chamber, through the stainless steel grill, the fine smaller solids become trapped in the mass of K1 Micro. Bio-films build up on the protected surface area within each piece of media, allowing biological filtration to take place.
After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe and flows back to the pond via the outlet.
The EazyPod Complete is incredibly simple to clean. The connected air pump is used during the cleaning cycle to agitate the K1 Micro to free up any debris and waste that has built up within the filter.
All EazyPod Complete models are supplied with a 70 litre per minute air pump and accessory kit.

Installing the EazyPod Complete

PUMP-FED INSTALLATION ONLY
By this we mean that if your pump is going to be used to supply the water to the filter, and the filtered water then returns back into your pond via gravity, i.e. down a waterfall, or through a large diameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump).
Select options This product has multiple variants. The options may be chosen on the product page
EazyPod UV Automatic
£819.95
EazyPod UV Automatic
£819.95

The automatic choice for your garden pond

The EazyPod Automatic is a self cleaning, automatic mechanical and biological filter
system for garden ponds up to 10,000 litres.
A control box fitted to the side of the filter contains an adjustable timer that

Overview

Inside the control box, the electronic connector blocks control the automated waste valve,
along with your circulating pump (not included). It even houses an
air pump that kicks in automatically to clean the
K1 Micro media.
Crystal clear, healthy water is achieved by the filter which is powered by a static bed of K1
Micro, which also provides enhanced biological benefits too.

Specifications

Dimensions

How the EazyPod Automatic works

The concept of the EazyPod Automatic is simple and yet innovative. Water enters via the inlet and
passes over an 18 watt UV Clarifying bulb (on UV versions ONLY), helping to kill any single celled algae
in the water.

The water then enters the outer chamber, which runs around the entire circumference of the
EazyPod. Between the outer chamber and the inner chamber, there is a stainless steel perforated
screen. These perforations are situated in the lower half of the screen and around its entire face.
This means that when the water passes from the outer to inner chamber,
a downward and upward flow is created. This causes many of the larger solids to settle in the base
of the outer chamber, due to the force of gravity.

The size of the perforations will not allow large mechanical waste to enter the inner chamber,
thus acting as a first stage mechanical filter. The inner chamber holds 18 litres of static K1 Micro
media. As the water enters the inner chamber, the fine smaller solids become entrapped in the K1
Micro. After passing through the K1 Micro, the clean water then rises and overflows into the inner
return pipe. From here it returns to the pond via the return outlet.

The EazyPod Automatic filtration system gives water quality and clarity that surpasses all
expectations. The nature and volume of the K1 Micro means, that when static, apart from being
a very efficient mechanical filter, there is more than enough surface area for beneficial bacteria to
colonise. Therefore on a smaller pond, the EazyPod Automatic is an excellent complete filter.

Installing the EazyPod Automatic

PUMP-FED INSTALLATION ONLY

By this we mean that if your pump is going to be used to supply the water to the filter, and the
filtered water then returns back into your pond via gravity, i.e. down a waterfall, or through a large
diameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump).

Cleaning Cycle

The K1 Micro is cleaned by the integrated air pump located inside the control box, that is connected to the air line in the EazyPod Automatic, which in turn goes to an air ring in the base of the inner chamber. The air ring has small holes in it which causes the K1 Micro to move and therefore clean itself.
During the cleaning cycle, the finer particles escape into chamber from the K1 Micro. This waste water will be automatically dumped via a 1½ inch motorised ball valve.

Cleaning is fully automated on the EazyPod Automatic, and is controlled by a built-in timer, which is factory set at one clean every 3 days, however, this is easily adjustable to fit in with your pond requirements. The EazyPod Automatic will run a cleaning cycle which lasts approximately 6 and a half minutes.

Select options This product has multiple variants. The options may be chosen on the product page
Economy Venturis
£12.95
Economy Venturis
£12.95
Economy Venturis

Great for adding oxergen to the water in summer.

Add to cart

ELECRO CYGNET EVO2 4KW DIGITAL HEATER (ALL TITANIUM)

£795.00

ELECRO CYGNET EVO2 4KW DIGITAL HEATER (ALL TITANIUM)

£795.00

A fully titanium heater by Elecro, the Evolution 2, is the latest and upgraded version of the original Evolution. Boasting 100% efficiency, safety, and above all, reliability, this compact and robust unit will effortlessly heat your pool or spa to your desired temperature.

FEATURES & BENEFITS

Ten power options ranging from 1-kW to 24-kW
Easy installation, fully equipped and pre-wired
Robust, durable construction
Ultra-reliable ﬂow switch allows safe operation
Temperature thermostat and overheating sensor
Compact, durable design
Analogue control with 1.2˚C differential or digital control with 0.5˚C differential and selectable multi-lingual display
Titanium ﬂow tube and titanium heating element
Can be ﬂoor or vertically wall mounted
Vortex, long life, stay clean heating element technology
100% efﬁciency throughout the product life
Silent operation

TECHNICAL DATA

Power Supply	Single phase or three phase
Flow Requirements	Minimum flow: 1-kW to 6-kW, 1m³/h Minimum flow: 9-kW to 24-kW, 4m³/h Maximum flow: 17m³/h
Heating Elements	Grade 1 titanium
Flow Tube	Grade 1 titanium
Control Thermostat	Analogoue: 0>45°C (1.2°C differential) Digital: 0 > 45°C (0.5°C differential)
Safety Thermal Cut Out	60°C (manual reset)
Flow Switch	Gold tipped reed switch with titanium fulcrum pin
Contactor	Siemens 3RT2023 OR 3RT2027
Seals	High temperature special formula EPDM ferrules, TPE end fitting gaskets
Water Connection	1.5” BSP female thread supplied with 1½” / 50mm stepped ABS unions for rigid pipe and 1½” / 1¼” stepped hose tails for flexible pipe
Ingress Protection Rating	IP44
Frequency	50/60 Hz
Working Pressure	4 bar maximum
Mounting	Floor or wall mounting

Direct air feed set (1″ pressure converters)
£27.99
Direct air feed set (1″ pressure converters)
£27.99

By using the converter set you can seal the ends of the ducting pipe (1″) and use it to pump the air through thus avoiding a column of stagnant water.

Add to cart
Sale!
Evolution Aqua 12mm Air Fittings
£0.95 – £7.75
Evolution Aqua 12mm Air Fittings
£0.95 – £7.75
- 12mm Equal Y
- 12mm Equal Tee
- 12mm Equal Elbow
- E3/8” Mini Ball Air Valve
- 3/8” BSP Male Stud End
- 3/8” Elbow BSP Male Thread
- 12mm Straight
- 12mm Pipe Clip
Select options This product has multiple variants. The options may be chosen on the product page
Evolution Aqua 12mm Air Tubing (LPD)
£2.00
Evolution Aqua 12mm Air Tubing (LPD)
£2.00
The Evolution Aqua 12mm Air Tubing (LPD) is suitable for use with the Evolution Aqua EazyPod and Nexus filters. This 12mm Air Tubing is made from Low Density Polyethylene and has an inside diameter of 10mm.

Cut to required length.

Just add to cart and press + on the amount of meters you require.

Select options This product has multiple variants. The options may be chosen on the product page

Search by category

Search

Search

Clear

EazyPod

Easy to use filter system

Overview

Specifications

Dimensions

How the EazyPod works

Installing the EazyPod

PUMP-FED INSTALLATION

GRAVITY-FED INSTALLATION

EazyPod Replacement UV Unit

EazyPod Air (includes Air Pump & Kit)

Easy to use filter system

Overview

Specifications

Dimensions

How the EazyPod works

Installing the EazyPod

PUMP-FED INSTALLATION

GRAVITY-FED INSTALLATION

Eazypod Automatic

The automatic choice for your garden pond

Overview

Specifications

Dimensions

How the EazyPod Automatic works

Installing the EazyPod Automatic

PUMP-FED INSTALLATION ONLY

Cleaning Cycle

EazyPod cleaning pipe

EazyPod complete (Includes Air Pump +Kit & 18watt UV)

Complete filtration with UVC

Overview

Specifications

How the EazyPod Complete works

Installing the EazyPod Complete

Installing the EazyPod Complete

EazyPod UV Automatic

The automatic choice for your garden pond

Overview

Specifications

Dimensions

How the EazyPod Automatic works

Installing the EazyPod Automatic

PUMP-FED INSTALLATION ONLY

Cleaning Cycle

Economy Venturis

ELECRO CYGNET EVO2 4KW DIGITAL HEATER (ALL TITANIUM)

FEATURES & BENEFITS

TECHNICAL DATA

Direct air feed set (1″ pressure converters)

Evolution Aqua 12mm Air Fittings

Evolution Aqua 12mm Air Tubing (LPD)