Kockney Koi Platinum 8000 Fliter

Related products

• Sale!

  EazyPod

  £549.95 Original price was: £549.95.£479.95Current price is: £479.95.

  EazyPod

  £549.95 Original price was: £549.95.£479.95Current price is: £479.95.

  

  Easy to use filter system

  A compact member of the Nexus family, the Eazy Pod is a mechanical and biological filter system for ponds up to 10,000 litres.
  The EasyPod utilises 18 litres of static K1 Micro, which provides enhanced biological benefits, even when using the Easy Pod solely as a mechanical waste filter.
  Available in Grey or Granite Green colours.

   

  Overview

  A compact member of the Nexus family, the EazyPod is a mechanical and biological filter system for ponds up to 10,000 litres. The EazyPod utilises 18 litres of static K1 Micro, which provides enhanced biological benefits, even when using the EazyPod solely as a mechanical waste filter. Also available as EazyPodAir models, which come supplied with AirPump70 Kit.

   

  Specifications

  

  Dimensions

  

  How the EazyPod works

  Water from the pond enters the EazyPod via the inlet and then flows around the circumference of the outer chamber of the EazyPod, passing through the stainless steel grill causing many of the larger solids to be filtered out and settle in the base of the outer chamber. This is the first stage of mechanical filtration. As water enters the central chamber, through the stainless steel grill, the fine smaller solids become trapped in the mass of K1 Micro. Bio-films build up on the protected surface area within each piece of media, allowing biological filtration to take place. After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe and flows back to the pond via the outlet. The EazyPod is incredibly simple to clean. The connected air pump is used during the cleaning cycle to agitate the K1 Micro to free up any debris and waste that has built up within the filter. A 70 litre per minute air pump is recommended for use during the cycle cleaning. *Only EazyPodAir and EazyPod Complete models are supplied with a 70 litre per minute air pump and accessory kit.

  

  Installing the EazyPod

  
  PUMP-FED INSTALLATION

  By this we mean that if your pump is going to be used to supply the water to the filter, and the filtered water then returns back into your pond via gravity, i.e. down a waterfall, or through a large diameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump).

  

  GRAVITY-FED INSTALLATION

  *User modification is required on the EazyPod to enable Gravity Fed installation. By this we mean that your pump is going to be used to return the filtered water to the pond and therefore your filter will be supplied by gravity via a larger diameter pipe. In this situation the water level in the filter will be at the same level as the pond.

  

   

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Aqua Source Synergy Combi 25 Drum Filter

  £3,545.00

  Aqua Source Synergy Combi 25 Drum Filter

  £3,545.00

  The Synergy Combi 25 offers ultra efficient mechanical filtration, combined with super efficient biological filtration, all in one compact unit. Suitable for ponds up to 5500 gallons.

  Designed so that the water level height is the same as a Nexus 220.

  Built to a very high standard, the filter features the following;

  • Flow rate of 5500 gallons per hour
  • 2 x 110mm inlets and 1 x 110mm outlet
  • Dry run protection
  • Fully automatic Siemens Logo control panel, manually adjustable
  • 70 micron screen with Blanketweed and debris trap on drum.
  • Lid with safety cut off switch
  • 4 bar cleaning pump
  • 210nm ultra reliable motor
  • Direct drive
  • Filter can still be run if the motor fails
  • Bio chamber holds 135 litres of water
  • 50 litres of Hel-X media supplied ( max 100 litres)
  • Air stone for bio section supplied
  • Full 12 month warranty ( exc. screen)
  • 3 year warranty on Flushing Pump ( Extendable)
  • Dimensions— External ; 1080mm x 620mm x 860mm ( LxWxH )
  • Drum Size—420mm (D) x 300 (W)

  Maximum water level 73cm, minimum 69cm – Installation height 12.5 above water level.

  Synergy Drum Manual 2020

   

  

  Add to cart
• 

  Nexus 320/310 Lid

  £124.95

  Nexus 320/310 Lid

  £124.95

  Lid to cover the Nexus 320 and Nexus 310

  New Style in Black and accommodates the Nexus Auto Kits. Please contact us for an up to date image

  Add to cart
• Sale!

  Evolution Aqua Cetus Sieve

  Save £50.00

  £795.00 Original price was: £795.00.£745.00Current price is: £745.00.

  Evolution Aqua Cetus Sieve

  Save £50.00

  £795.00 Original price was: £795.00.£745.00Current price is: £745.00.

  

   

  Pre-filter to remove waste & debris

  The Cetus sieve is a bow screen pre-filter, made using the latest rotational molding technology. With all of its benefits and build quality, it is undoubtedly the best of its kind on the market today, regarding quality and performance! It is designed to efficiently and effectively remove large amounts of mechanical waste from a pond. It can be set-up gravity OR pump fed and has many benefits over the original bow screen technology.

   

  
  

   

  Overview

  The Cetus Sieve is a self-adjusting sieve which can be installed either gravity fed or pump fed. The Cetus Sieve enables your pond water to be filtered of large amounts of waste and debris before the water enters your current filter system. This process is commonly referred to as “pre-filtering”. The Cetus Sieve can also be used as a stand-alone unit to remove leaves and other floating debris from your pond via a surface skimmer. The Cetus Sieve will efficiently and effectively remove large amounts of mechanical waste from your pond. The Cetus Sieve is compatible with all filtration systems, however it is the perfect prefilter for the Evolution Aqua Nexus filter range. For gravity fed systems the Cetus Sieve has a weir which will automatically adjust to the flow rate of your pump. (Max flow rate 18,000 litres/hr) When the Cetus Sieve is used in front of any other biological/mechanical filter the period in between cleaning will be extended. The biological process is improved by the removal of organic matter which would consume oxygen and leach ammonia and other compounds into the water.

  Specifications

  Model	Max. flow rate	Inlet – Gravity Fed	Inlet – Pump Fed	Outlet – Gravity Fed	Outlet – Pump Fed
  	18,000 Litres/hr 4,000 UK Gallons/hr 4,755 US Gallons/hr	110mm/4″	50mm/1½”	1½”	3″

   

  Dimensions

  

  

  How the Cetus Sieve works

  Installing the Cetus Sieve The Cetus Sieve has a variable inlet height using the unique patented Pondflow regulation system – for use when gravity fed. This allows water levels within the pond to drop without causing the circulating pump to be starved of water. The Cetus will allow a skimmer or a bottom drain to accept vast amounts of waste without excessive cleaning needed to be carried out. The water must then be pumped to either a normal filter above pond level (Nexus Eazy/Eazy Pod) or to a pressurised filter.

  If pump fed, the sieve is placed above pond water level and then the exit water is gravity dropped into your main filter.

  The Cetus sieve is a bow screen pre-filter, suitable for pre-filtration of any biological filter including all pressured filters. It is advised that all pressurised filters be pre-filtered using a Cetus to reduce excessive backwashing and maintenance due to heavy solids.

   

  
  

   

  Installing the Cetus Sieve

  The Cetus Sieve has a variable inlet height using the unique patented Pondflow regulation system – for use when gravity fed. This allows water levels within the pond to drop without causing the circulating pump to be starved of water. The Cetus will allow a skimmer or a bottom drain to accept vast amounts of waste without excessive cleaning needed to be carried out. The water must then be pumped to either a normal filter above pond level (Nexus Eazy/Eazy Pod) or to a pressurised filter.

  If pump fed, the sieve is placed above pond water level and then the exit water is gravity dropped into your main filter. The Cetus sieve is a bow screen pre-filter, suitable for pre-filtration of any biological filter including all pressured filters. It is advised that all pressurised filters be pre-filtered using a Cetus to reduce excessive backwashing and maintenance due to heavy solids. The Cetus Sieve has a variable inlet height using the unique patented Pondflow regulation system – for use when gravity fed. This allows water levels within the pond to drop without causing the circulating pump to be starved of water. The Cetus will allow a skimmer or a bottom drain to accept vast amounts of waste without excessive cleaning needed to be carried out. The water must then be pumped to either a normal filter above pond level (Nexus / Eazy Pod) or to a pressurised filter.

  If pump fed, the sieve is placed above pond water level and then the exit water is gravity dropped into your main filter. The Cetus sieve is a bow screen pre-filter, suitable for pre-filtration of any biological filter including all pressured filters. It is advised that all pressurised filters be pre-filtered using a Cetus to reduce excessive backwashing and maintenance due to heavy solids.

   

  GRAVITY-FED INSTALLATIONS

  

  GRAVITY-FED INSTALLATIONS

  
  

  
  

  

  PUMP-FED INSTALLATIONS

  

  Add to cart