Pipework & Fittings

Showing 1–12 of 80 results

Sale!
Pressure Pipe – (Evolution Aqua)
£7.59 – £141.54
Pressure Pipe – (Evolution Aqua)
£7.59 – £141.54
Pressure Pipe – (Evolution Aqua)

Select options This product has multiple variants. The options may be chosen on the product page
Sale!
Rubber Flexi Pond Pipe Fittings, T Piece
£8.50 – £23.70
Rubber Flexi Pond Pipe Fittings, T Piece
£8.50 – £23.70
Rubber Flexi Pond Pipe Fittings, Elbows, Straight Connectors & T pieces make plumbing your pond pipework quick and simple. No need for solvent glues and sealants is required. No time is wasted waiting for glue and sealant to cure. Time can be crucial when trying to keep filter bacteria at its peak. The smooth rubber inner wall aids the flow of water through your ponds pipes causing less loss of flow from your pumps.The Flexible nature of the rubber bends also allow pond pipe connections to be made were poor alignment exists with already installed rigid pond pipes.Fast Installation of additional equipmentFlexi Rubber fittings are incredibly useful when installing additional equipment to your pond. Additional Equipment used for keeping your water crystal clear can be temporarily or permanently fitted quickly. Additional equipment such as Bakki Showers, Nexus filters, state of the art drum filters, additional UV units can be piped up quickly and simply, the only tool required is a flat head screwdriver or an eight millimetre socket. The socket is preferred as flat head screwdrivers can slip and cause injury.When the extra equipment is no longer required simply undo the fastening bands and disconnect your equipment. Reconfigure and re route your pipework with ease using the same fittings and tools. This cannot be achieved by using solvent weld fittings. Can be used again and again unlike solvent weld fittings. Very useful were access is tight and confined. Great for emergency repairs. Quick fittings for additional filters etc.

Select options This product has multiple variants. The options may be chosen on the product page
Sale!
Rubber Flexi Pond Pipe Fittings, Straight Connectors
£3.75 – £22.90
Rubber Flexi Pond Pipe Fittings, Straight Connectors
£3.75 – £22.90
Rubber Flexi Pond Pipe Fittings, Elbows, Straight Connectors make plumbing your pond pipework quick and simple. No need for solvent glues and sealants is required. No time is wasted waiting for glue and sealant to cure. Time can be crucial when trying to keep filter bacteria at its peak. The smooth rubber inner wall aids the flow of water through your ponds pipes causing less loss of flow from your pumps.The Flexible nature of the rubber bends also allow pond pipe connections to be made were poor alignment exists with already installed rigid pond pipes.Fast Installation of additional equipmentFlexi Rubber fittings are incredibly useful when installing additional equipment to your pond. Additional Equipment used for keeping your water crystal clear can be temporarily or permanently fitted quickly. Additional equipment such as Bakki Showers, Nexus filters, state of the art drum filters, additional UV units can be piped up quickly and simply, the only tool required is a flat head screwdriver or an eight millimetre socket. The socket is preferred as flat head screwdrivers can slip and cause injury.When the extra equipment is no longer required simply undo the fastening bands and disconnect your equipment. Reconfigure and re route your pipework with ease using the same fittings and tools. This cannot be achieved by using solvent weld fittings. Can be used again and again unlike solvent weld fittings. Very useful were access is tight and confined. Great for emergency repairs.

Select options This product has multiple variants. The options may be chosen on the product page
Sale!
Rubber Flexi Pond Pipe Fittings, 90° Elbows, Swept Bends
£8.50 – £18.95
Rubber Flexi Pond Pipe Fittings, 90° Elbows, Swept Bends
£8.50 – £18.95
Rubber Flexi Pond Pipe Fittings, Elbows, Swept Bends make plumbing your pond pipework quick and simple. No need for solvent glues and sealants is required. No time is wasted waiting for glue and sealant to cure. Time can be crucial when trying to keep filter bacteria at its peak. The Swept bend aids the flow of water through your ponds pipes causing less loss of flow from your pumps.The Flexible nature of the rubber bends also allow pond pipe connections to be made were poor alignment exists with already installed rigid pond pipes.Fast Installation of additional equipmentFlexi Rubber fittings are incredibly useful when installing additional equipment to your pond. Additional Equipment used for keeping your water crystal clear can be temporarily or permanently fitted quickly. Additional equipment such as Bakki Showers, Nexus filters, state of the art drum filters, additional UV units can be piped up quickly and simply, the only tool required is a flat head screwdriver or an eight millimetre socket. The socket is preferred as flat head screwdrivers can slip and cause injury.When the extra equipment is no longer required simply undo the fastening bands and disconnect your equipment. Reconfigure and re route your pipework with ease using the same fittings and tools. This cannot be achieved by using solvent weld fittings. Fastening bands are rated to be tightened to 6Nm. Can be used again and again unlike solvent weld fittings. Very useful were access is tight and confined.

Select options This product has multiple variants. The options may be chosen on the product page
Sale!
Rubber End Cap
£2.33 – £4.23
Rubber End Cap
£2.33 – £4.23
Using rubber connectors allows you to reconfigure your pond and filter pipework quickly and easily. Simply loosen and tighten with an 8mm socket / spanner or flat head screwdriver. These pipes are very useful in tight spots and require no glue or sealing which makes the rubber fittings reusable again and again.Using the end caps allows you to fit additional equipment to your pipe work at a later date, as well as allowing you to remove equipment for repair, service or replacement.

Select options This product has multiple variants. The options may be chosen on the product page
Sale!
Ro Pipe ( per meter) (1/4”)
Original price was: £0.48.Current price is: £0.46.
Ro Pipe ( per meter) (1/4”)
Original price was: £0.48.Current price is: £0.46.
Ro Pipe 1/4” White
Used for reverse osmosis systems, 3 stage water dechlorinator.
Good for trickle in systems on koi ponds.
Cut to required length.
Just add to cart and press + on the amount of meters you require.
These fittings and the food grade pipe make an excellent choice for getting fresh water to your pond. Many Koi Keepers use non food grade hose pipes which can and do leach toxins into the pond water. Using the RO fittings and pipe helps t0 deliver a controlled flow to the pond using food grade materials. Flow over de-chlorinator units can be critical and the use of these fittings physically reduces the flow rate.

Select options This product has multiple variants. The options may be chosen on the product page
Sale!
Reducing Bushes pressure pipe to waste
£1.47 – £4.70
Reducing Bushes pressure pipe to waste
£1.47 – £4.70
Reducing bushes are used to convert Grey Pressure Pipe to Black Solvent weld pipe and vice versa. Use solvent weld glue on the bushes and then a Pressure pipe fitting, Slide Valve or double union valve to convert.
Always the best way to covert pipework is to visit us in our shop so we can help with conversions etc.

Select options This product has multiple variants. The options may be chosen on the product page
Sale!
Reducer pressure pipe fitting
£1.85 – £8.50
Reducer pressure pipe fitting
£1.85 – £8.50
Large selection of Reducer’s in Pressure (Grey).

4″-3″ Reducer (pressure)
3″-2″ Reducer (pressure)
2″-1.5″ Reducer (pressure)
3/4″ to 1/2″ Plain Reducing Bush
1″ to 3/4″ Plain Reducing Bush
1 1/2″ to 3/4″ Plain Reducing Bush
1 1/2″ to 1″ Plain Reducing Bush
3″ to 1 1/2″ Plain Reducing Bush

Select options This product has multiple variants. The options may be chosen on the product page
Sale!
PVC Pressure pipe
£9.45 – £52.20
PVC Pressure pipe
£9.45 – £52.20
Grey PVC Pressure pipe available in 6 sizes & 3 Metre & 1 Metre lengths

40mm
1″
1.5″
2″
3″
4″
3/4″

Select size and length from drop down menu
N.B. 40mm pressure pipe is only available in 1m or 2m legnths

Select options This product has multiple variants. The options may be chosen on the product page
Sale!
Pressure Threaded Hosetail (1.5″ BSP thread to 1.5″ tail
Save £5.95
Original price was: £5.95.Current price is: £5.65.
Pressure Threaded Hosetail (1.5″ BSP thread to 1.5″ tail
Save £0.30
Original price was: £5.95.Current price is: £5.37.
Add to cart
Sale!
Socket Nipple
£1.38 – £4.23
Socket Nipple
£1.38 – £4.23
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards. Suited for i.e. irrigation, swimming pools, ponds,

Select options This product has multiple variants. The options may be chosen on the product page
Sale!
Plain male – female thread 1.5″ – 1.5″
Save £3.35
Original price was: £3.35.Current price is: £3.18.
Plain male – female thread 1.5″ – 1.5″
Save £0.17
Original price was: £3.35.Current price is: £3.02.
Plain male – female thread 1.5″ – 1.5″

Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards. Suited for i.e. irrigation, swimming pools, ponds,

Add to cart