Pond Accessories
Showing 61–72 of 209 results
-
Colombo NO3 (Nitrate) Water Test Kit
£11.99
Add to cartColombo NO3 (Nitrate) Water Test Kit
£11.99
NO3 (Nitrate) test kit – Colombo
Used to measure NO3, Nitrate levels in your Koi pond. Nitrate is the final stage of the nitrogen cycle. The Nitrogen cycle is essential for converting harmful Ammonia, to slightly less harmful Nitrite and finally Nitrate.
Colombo liquid tests
Liquid tests for accurate measurement of pH acidity), KH (Carbonate hardness), GH (total hardness, NH3 (ammonia), NO2 (nitrite), NO3 (nitrate) and PO4 (phosphate). to the highest requirements, are easy to use and give a reliable measurement result.
-
Colombo PH (Acidity)Water Test
£7.64
Add to cartColombo PH (Acidity)Water Test
£7.64
PH test Colombo
Use for an accurate measurement of pH (acidity) in your pond. pH levels need to be stable in any pond containing Fish, particularly Koi Carp.
Colombo liquid tests
Liquid tests for accurate measurement of pH acidity), KH (Carbonate hardness), GH (total hardness, NH3 (ammonia), NO2 (nitrite), NO3 (nitrate) and PO4 (phosphate). to the highest requirements, are easy to use and give a reliable measurement result.
-
Colombo PO4 (Phosphate)Water Test Kit
£11.99
Add to cartColombo PO4 (Phosphate)Water Test Kit
£11.99
PO4 (Phosphate) Water Test Kit – Colombo
One of the major water parameter tests needed to keep your Koi Healthy and well and blanketweed away.
Used to measure PO4, Phosphate levels in your Koi pond.
Colombo liquid tests
Liquid tests for accurate measurement of pH acidity), KH (Carbonate hardness), GH (total hardness, NH3 (ammonia), NO2 (nitrite), NO3 (nitrate) and PO4 (phosphate). to the highest requirements, are easy to use and give a reliable measurement result.
-
Eazy Clear Plastic Lid
£29.95
-
Sale!
Economy Bottom Drains
£18.95 – £20.85
Select options This product has multiple variants. The options may be chosen on the product pageEconomy Bottom Drains
£18.95 – £20.85
A bottom drain is an essential component of proper Koi pond design and filtration. Installing a bottom drain when first constructing a Koi pond is highly recommended. If a pond does not already have one, a retrofit bottom drain can be added and is advised by Elite Koi.
The bottom drain is usually situated in the deepest part of the pond and is connected to the filtration system intake. Having a bottom drain serves several important purposes:
- Removes debris and waste – The bottom drain sucks up solid waste like fish poop, uneaten food, and organic debris that sinks to the bottom of the pond. This keeps the pond floor clean and prevents buildup.
- Improves water circulation – Water flow across the bottom of the pond is increased which prevents dead spots. The bottom drain moves water from the bottom to the filter which improves overall water circulation.
- Aids filtration – Bottom drain water flow helps filter intake catch more waste particles and prevents clogging. Bottom sediment is removed before it converts to toxins like ammonia and nitrites.
- Reduces pump load – Pumps don’t have to work as hard if some of the water flow is handled by gravity via the bottom drain. This improves energy efficiency.
- Prevents fish stress – Fish aren’t fighting strong intake suction at the surface which can stress them. The bottom drain gently pulls water down below.
- Retrofitting a bottom drain involves digging out the pond floor, installing drain pipe and a drain cover, and hooking to the filter system. This is disruptive but worth the long-term benefits for Koi health and pond cleanliness.
In summary, installing a bottom drain is one of the best investments for proper Koi pond function. Elite Koi always recommends adding one if not already present.
Economy Bottom Drains
Drain with cover to keep fish out and to provide good suction on the bottom drain
outlet for minimal accumulation of sediments.50mm: round 20 cm and lid round 22 cm.
110mm: round 32 cm and lid 38 cm. -
Economy Venturis
£12.95
-
Out of StockELECRO CYGNET EVO2 4KW DIGITAL HEATER (ALL TITANIUM)
£795.00
Read moreELECRO CYGNET EVO2 4KW DIGITAL HEATER (ALL TITANIUM)
£795.00
A fully titanium heater by Elecro, the Evolution 2, is the latest and upgraded version of the original Evolution. Boasting 100% efficiency, safety, and above all, reliability, this compact and robust unit will effortlessly heat your pool or spa to your desired temperature.
FEATURES & BENEFITS
- Ten power options ranging from 1-kW to 24-kW
- Easy installation, fully equipped and pre-wired
- Robust, durable construction
- Ultra-reliable flow switch allows safe operation
- Temperature thermostat and overheating sensor
- Compact, durable design
- Analogue control with 1.2˚C differential or digital control with 0.5˚C differential and selectable multi-lingual display
- Titanium flow tube and titanium heating element
- Can be floor or vertically wall mounted
- Vortex, long life, stay clean heating element technology
- 100% efficiency throughout the product life
- Silent operation
TECHNICAL DATA
Power Supply Single phase or three phase
Flow Requirements Minimum flow: 1-kW to 6-kW, 1m³/h
Minimum flow: 9-kW to 24-kW, 4m³/h
Maximum flow: 17m³/hHeating Elements Grade 1 titanium
Flow Tube Grade 1 titanium
Control Thermostat Analogoue: 0>45°C (1.2°C differential)
Digital: 0 > 45°C (0.5°C differential)Safety Thermal Cut Out 60°C (manual reset)
Flow Switch Gold tipped reed switch with titanium fulcrum pin
Contactor Siemens 3RT2023 OR 3RT2027
Seals High temperature special formula EPDM ferrules, TPE end fitting gaskets
Water Connection 1.5” BSP female thread supplied with 1½” / 50mm stepped ABS unions for rigid pipe and 1½” / 1¼” stepped hose tails for flexible pipe
Ingress Protection Rating IP44
Frequency 50/60 Hz
Working Pressure 4 bar maximum
Mounting Floor or wall mounting
-
Empty Refillable Media Cartridge (for 3 Stage 10″ Dechlorinator)
£9.95
Add to cartEmpty Refillable Media Cartridge (for 3 Stage 10″ Dechlorinator)
£9.95
Empty Refillable Media Cartridge-
Available to be pre filled with the media of your choice
-
Sponges eliminate media migrating into treated water
-
Thick gasket and screw head secures the cartridge from leaks
-
Standard sizing ensures universal compatibility
-
-
Out of StockFloating surface skimmer with basket (200mm Dia and fits 110
£69.95
Read moreFloating surface skimmer with basket (200mm Dia and fits 110
£69.95
Floating skimmer with a diameter of approx. 200mm and a 110mm pipe connection at the bottom side. Comes with basket, can be used without basket.
-
Out of StockFree Chlorine – HANNA Hi-701-25 Reagent
£19.95
Read moreFree Chlorine – HANNA Hi-701-25 Reagent
£19.95
These reagents follow the DPD Method in which the reaction between chlorine and reagent causes a pink tint in the sample. By simply adding the packet of HI-701-25 reagent, the reaction will take place and the HI-701 will determine the concentration from the colour that is produced. The results will be displayed in ppm (mg/L) of free chlorine. These reagents are designed to be used with samples that have an expected range of 0.00 to 2.50 ppm free chlorine.
The HI-775-26 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Freshwater Alkalinity Checker® HC. These reagents follow the Colorimetric Method in which the reaction causes a distinctive range of colours from yellow to green to blue to develop. By simply adding one drop of the Chlorine Remover to remove the chlorine interference, and subsequently adding 1 mL of the Alkalinity Reagent to the sample, the reaction will take place and the HI-775 will determine the concentration from the colour that is produced. The results will be displayed in ppm of CaCO3. These reagents are designed to be used with samples that have an expected range of 0 to 500 ppm CaCO3.
The HI-733-25 is a high-quality, pre-measured reagent allowing users to achieve fast and accurate measurements with their Ammonia High Range Checker® HC. These reagents follow the Nessler Method in which the reaction between ammonia and reagents causes a yellow tint in the sample. By simply adding 9 mL from the first reagent bottle and subsequently 4 drops from the dropper bottle to the sample, the reaction will take place and the HI-733 will determine the concentration from the colour that is produced.
Results will be displayed in ppm (mg/L) of ammonia-nitrogen (NH3-N). These reagents are designed to be used with samples that have an expected range of 0.0 to 99.9 ppm ammonia-nitrogen. To convert the reading to ppm of ammonia (NH3) multiply the result by 1.214.
Bottle size: Reagent A – 30ml, Reagent B – 120ml x 2.
This 25 pack of reagents is for use with the HI-700 Ammonia Low Range Pocket Checker.
The HI-700-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Ammonia Checker® HC. These reagents follow the Nessler Method in which the reaction between ammonia and reagents causes a yellow tint in the sample. By simply adding 4 drops from each bottle of HI-700-25 reagent set to the sample, the reaction will take place and the HI-700 will determine the concentration from the colour that is produced. The results will be displayed in ppm (mg/L) of ammonia-nitrogen (NH3-N). These reagents are designed to be used with samples that have an expected range of 0.00 to 3.00 ppm ammonia-nitrogen. To convert the reading to ppm of ammonia (NH3) multiply the result by 1.214.
The HI-715-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Ammonia Medium Range Checker® HC. These reagents follow the Nessler Method in which the reaction between ammonia and reagents causes a yellow tint in the sample. By simply adding 4 drops from each bottle of the HI-715-25 reagent set to the sample, the reaction will take place and the HI-715 will determine the concentration from the colour that is produced. The results will be displayed in ppm (mg/L) of ammonia-nitrogen (NH3-N). These reagents are designed to be used with samples that have an expected range of 0.00 to 9.99 ppm ammonia-nitrogen. To convert the reading to ppm of ammonia (NH3) multiply the result by 1.214.
The HI-716-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Bromine Checker® HC. These reagents follow the DPD Method in which the reaction between bromine and reagent causes a pink tint in the sample. By simply adding the packet of HI-716-25 reagent to the sample, the reaction will take place and the HI-716 will determine the concentration from the colour that is produced. The results will be displayed in ppm (mg/L) of bromine. These reagents are designed to be used with samples that have an expected range of 0.0 to 8.0 ppm bromide.
The HI-771-25 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Total Chlorine Ultra High Range Checker®HC. These reagents follow the DPD Method in which the reaction between chlorine and reagent causes a pink tint in the sample. By simply adding the packet of HI-771-25 reagent to the sample, the reaction will take place and the HI-771 will determine the concentration from the colour that is produced. The results will be displayed in ppm of total chlorine. These reagents are designed to be used with samples that have an expected range of 0 to 500 ppm total chlorine.
The HI-723-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Chromium VI High Range Checker® HC. These reagents follow the Diphenylcarbohydrazide Method in which the reaction between chromium VI and the reagent causes a purple tint in the sample. By simply adding the packet of HI-723-25 reagent to the sample, the reaction will take place and the HI-723 will determine the concentration from the colour that is produced. The results will be displayed in ppb of chromium VI. These reagents are designed to be used with samples that have an expected range of 0 to 999 ppb chromium VI.
The HI-749-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Chromium VI Low Range Checker® HC. These reagents follow the Diphenylcarbohydrazide Method in which the reaction between chromium VI and the reagent causes a purple tint in the sample. By simply adding the packet of HI-749-25 reagent to the sample, the reaction will take place and the HI-749 will determine the concentration from the colour that is produced. The results will be displayed in ppb of chromium VI. These reagents are designed to be used with samples that have an expected range of 0 to 300 ppb chromium VI.
The HI-702-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Copper High Range Checker® HC. These reagents follow the Bicinchoninate Method in which the reaction between copper and the reagent causes a purple tint in the sample. By simply adding the packet of HI-702-25 reagent to the sample, the reaction will take place and the HI-702 will determine the concentration from the colour that is produced. The results will be displayed in ppm of copper. These reagents are designed to be used with samples that have an expected range of 0.00 to 5.00 ppm copper.
The HI-747-25 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Copper Low Range Checker® HC. These reagents follow the Bicinchoninate Method in which the reaction between copper and the reagent causes a purple tint in the sample. By simply adding the packet of HI-747-25 reagent to the sample, the reaction will take place and the HI-747 will determine the concentration from the colour that is produced. The results will be displayed in ppb of copper. These reagents are designed to be used with samples that have an expected range of 0 to 999 ppb copper.
The HI-739-26 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Fluoride High Range Checker® HC. These reagents follow the SPADNS Method in which the reaction between fluoride and the reagent causes a colourless complex in the sample. By simply adding 2 mL of SPADNS reagent to two cuvettes, and subsequently 8 mL of the second reagent to one and 8 mL of sample in the other, the reaction will take place and the HI-739 will determine the concentration from the colour that is produced. The results will be displayed in ppm of fluoride. These reagents are designed to be used with samples that have an expected range of 0.0 to 20.0 ppm (mg/L) fluoride.
The HI-729-26 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Fluoride Low Range Checker® HC. These reagents follow the SPADNS Method in which the reaction between fluoride and the reagent causes a colourless complex in the sample. By simply adding 2 mL of SPADNS reagent to two cuvettes, and subsequently 8 mL of deionised water to one and 8 mL of sample in the other, the reaction will take place and the HI-729 will determine the concentration from the colour that is produced. The results will be displayed in ppm of fluoride. These reagents are designed to be used with samples that have an expected range of 0.00 to 2.00 ppm (mg/L) fluoride.
The HI-718-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Iodine Checker® HC. These reagents follow the DPD Method in which the reaction between iodine and reagent causes a pink tint in the sample. By simply adding the packet of HI-718-25 reagent to the sample, the reaction will take place and the HI-718 will determine the concentration from the colour that is produced. The results will be displayed in ppm (mg/L) of iodine. These reagents are designed to be used with samples that have an expected range of 0.0 to 12.5 ppm (mg/L) iodine.
The HI-746-25 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Iron Low Range Checker® HC. These reagents follow the TPTZ Method in which the reaction between iron and reagents causes a violet tint in the sample. By simply adding the packets of HI-746-25 reagents to the sample, the reaction will take place and the HI-746 will determine the concentration from the colour that is produced. The results will be displayed in ppb of iron. These reagents are designed to be used with samples that have an expected range of 0 to 999 ppb iron.
The HI-719-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Magnesium Hardness Checker® HC. These reagents follow the EDTA colorimetric method in which the reaction between magnesium and the reagent causes a violet tint in the sample. When the HI-719-25 reagents are added to the sample, the reaction will take place and the HI-719 will determine the concentration from the colour that is produced. The results will be displayed in ppm of magnesium hardness as CaCO3. These reagents are designed to be used with samples that have an expected range of 0.00 to 2.00 ppm CaCO3.
These reagents follow the Periodate method in which the reaction between manganese and the reagents causes a pink tint in the sample. When the HI-709-25 reagents are added to the sample, the reaction will take place and the HI-709 will determine the concentration from the colour that is produced. The results will be displayed in ppm of manganese. These reagents are designed to be used with samples that have an expected range of 0.0 to 20.0 ppm manganese.
The HI-758-26 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Marine Calcium Checker® HC. These reagents follow the Zincon Method in which the reaction causes a blue tint in the sample. By simply adding 1 mL of the first reagent to the sample, followed by a packet of the second reagent in the HI-758-26 set, the reaction will take place and the HI-758 will determine the concentration from the colour that is produced. The results will be displayed in ppm of calcium. These reagents are designed to be used with samples that have an expected range of 200 to 600 ppm calcium.
The HI-774-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Phosphate Ultra Low Range Checker® HC.
These reagents follow the Ascorbic Acid Method in which the reaction between phosphate and reagents causes a blue tint in the sample.
By simply adding the packet of HI-774-25 reagent to the sample, the reaction will take place and the HI-774 will determine the concentration from the colour that is produced.
The results will be displayed in ppb of phosphate. These reagents are designed to be used with samples that have an expected range of 0.00 to 0.90 ppm phosphate.
The HI-708-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Nitrite High Range Checker® HC. These reagents follow the Ferrous Sulphate Method in which the reaction between nitrite and reagent causes a greenish-brown tint in the sample. By simply adding the packet of HI-708-25 reagent to the sample, the reaction will take place and the HI-708 will determine the concentration from the colour that is produced. The results will be displayed in ppm (mg/L) of nitrite. These reagents are designed to be used with samples that have an expected range of 0 to 150 ppm nitrite.
This reagent is for use with the HI-707 nitrite low range pocket checker and provides enough for 25 tests.
The HI-707-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Nitrite Low Range Checker® HC. These reagents follow the Diazotization Method in which the reaction between nitrite and reagent causes a pink tint in the sample. By simply adding the packet of HI-707-25 reagent to the sample, the reaction will take place and the HI-707 will determine the concentration from the colour that is produced. The results will be displayed in ppb of nitrite. These reagents are designed to be used with samples that have an expected range of 0 to 600 ppb nitrite.
The HI-706-25 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Phosphorus High Range Checker® HC. These reagents follow the Amino Acid Method in which the reaction between phosphorus and reagents causes a blue tint in the sample. By simply adding 10 drops of the first reagent to the sample, followed by the packet of the HI-706-25 reagent set, the reaction will take place and the HI-706 will determine the concentration from the colour that is produced. The results will be displayed in ppm (mg/L) of phosphorus. These reagents are designed to be used with samples that have an expected range of 0.00 to 15.00 ppm (mg/L) phosphorus.
The HI-770-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Silica High Range Checker® HC. These reagents follow the Standard Method 4500-SiO2C in which the reaction between silica and reagents causes a yellow tint in the sample. By simply adding the packet of HI-770-25 reagent to the sample, the reaction will take place and the HI-770 will determine the concentration from the colour that is produced. The results will be displayed in ppm of silica. These reagents are designed to be used with samples that have an expected range of 0 to 200 ppm silica.
The HI-705-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Silica Low Range Checker® HC. These reagents follow the Heteropoly Blue Method in which the reaction between silica and reagents causes a blue tint in the sample. By simply adding 6 drops from the first reagent bottle to the sample, followed by the remaining two packets of the HI-705-25 reagent set, the reaction will take place and the HI-705 will determine the concentration from the colour that is produced. The results will be displayed in ppm (mg/L) of silica. These reagents are designed to be used with samples that have an expected range of 0.00 to 2.00 ppm silica.
The HI-711-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Total Chlorine Checker® HC – HI-711. These reagents follow the DPD Method in which the reaction between chlorine and reagent causes a pink tint in the sample. By simply adding the packet of HI-711-25 reagent to the sample, the reaction will take place and the HI-711 will determine the concentration from the colour that is produced. The results will be displayed in ppm (mg/L) of total chlorine. These reagents are designed to be used with samples that have an expected range of 0.00 to 3.50 ppm (mg/L) total chlorine.
The HI-761-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Total Chlorine Ultra Low Range Checker® HC. These reagents follow the DPD Method in which the reaction between chlorine and reagent causes a pink tint in the sample. By simply adding the packet of HI-761-25 reagent to the sample, the reaction will take place and the HI-761 will determine the concentration from the colour that is produced. The results will be displayed in ppb of total chlorine. These reagents are designed to be used with samples that have an expected range of 0 to 500 ppb total chlorine.
-
G4 Pond Sealer
£26.95 – £523.95
Select options This product has multiple variants. The options may be chosen on the product pageG4 Pond Sealer
£26.95 – £523.95
G4 Pond Sealer
G4 is a durable deep bonding plastic coating for concrete which can be used without primer at low temperatures to seal in the lime in concrete ponds / water features
-
Gen-X Nitrile Gloves (Extra-Large, 100 Count)
£5.95
Add to cartGen-X Nitrile Gloves (Extra-Large, 100 Count)
£5.95
- NITRILE GLOVES: These powder-free, medical-grade rubber gloves are commonly used in laboratories. Our extra large nitrile gloves disposable size contain butadiene rubber which provides limited chemical protection.
- DURABLE & COMFORTABLE: Our 100% nitrile butadiene rubber extra large nitrile gloves are durable and comfortable to wear. These powder free gloves are food-safe & medical grade to meet various needs.
- EXCELLENT GRIP: The 3 mm thickness of our textured nitrile gloves provides enhanced grip when working on smaller objects. These gloves are strong and flexible. These blue nitrile gloves have beaded cuffs and are EN455 compliant.
- POWDER-FREE & LATEX-FREE: Our non-sterile disposable nitrile gloves are powder and latex free. These food safe gloves reduce allergic reactions on the skin and help to avoid the risk.
- MULTIPURPOSE: The pack of 100 disposable gloves extra large is perfect for use with tools, devices, instruments, restaurant settings & more. These mechanic gloves provide the necessary protection and these are tear-resistant.
