Pond Filtration

Showing 1–12 of 32 results

K+ Advanced Filter

£995.00 – £1,595.00

K+ Advanced Filter

£995.00 – £1,595.00

Model	Diameter	Maximum Pond Size	Optimum Flow Rate	Volume Of K+Advanced Media	Multiport Valve Size	Max. Working Pressure
K+AdvancedFilter20	20″ (500mm)	18,000 Litres 4,000 UK Gallons 4,800 US Gallons	6,000 LPH 1,320 GPH 1,585 US GPH	50 Litres 11 UK Gallons 13.2 US Gallons	1½”	1.5 Bar
K+AdvancedFilter24	24″ (620mm)	36,000 Litres 8,000 UK Gallons 9,600 US Gallons	12,000 LPH 2,640 GPH 3,170 US GPH	100 Litres 22 UK Gallons 26.4 US Gallons	2″	1.5 Bar
K+AdvancedFilter30	30″ (750mm)	54,500 Litres 12,000 UK Gallons 14,500 US Gallons	18,000 LPH 3,960 GPH 4,755 US GPH	150 Litres 33 Gallons 39.6 US Gallons	2″	1.5 Bar
K+AdvancedFilter36	36″ (900mm)	91,000 Litres 20,000 UK Gallons 24,000 US Gallons	30,000 LPH 6,600 GPH 7,925 US GPH	250 Litres 55 Gallons 66 US Gallons	2″	1.5 Bar

Best-in-Class Filtration Media

The benefits of using K+Media have been well documented since its launch in 2019, including its ability to filter particles down to one micro. The design and profile of the media helps to improve flow, its vast protected surface area of 1,025m2 per m3, or the total area of 5x tennis courts, maintains stable bio-films and its unique manufacturing process where minerals and enzymes are added during the extrusion process, ensure K+Media matures faster than any other type of filtration media. Evolution Aqua’s filter media has also been independently tested to verify its performance by IFTS and Cranfield University. Read more »

How K+Advanced Filters work?

Water is pumped into the filter from the pond, through the multi-port valve where the internal pipework directs the water to the bottom laterals.

As the water flows upwards inside the K+Advanced Filter, dirt, debris and waste are trapped within the mass of K+Media that floats at the top of the filter. The vast protected surface area provided by K+Media also provides a home for beneficial bacteria, delivering mechanical and biological filtration.

The filtered water flows back through the laterals and pipework at the top of the filter, through the multi-port valve and back down the return line into the pond.

The K+Advanced Filter, is incredibly easy to clean by simply moving the handle on the multi-port valve into the corresponding positions to perform a backwash and rinse which flushes out the waste trapped inside.

How to install K+Advanced Filters?

The K+Advanced Filter can be installed as shown if you are planning to use a pre-filter such as the Evolution Aqua Cetus Sieve. If you are not planning to use a pre-filter we highly recommend that you fit a strainer basket to the pump.This will prevent leaves, string algae etc. from entering the filter and pump.

*It is recommended that all pipework on the pump side (from the pump to the filter and back to the pond) is installed on 2” pipe. Please note on the K+Advanced Filter 20 you will have to reduce your pipe down to 1½” to connect to the multiport valve. This will ensure that your pump is working at its maximum flow.

Do not operate the multiport valve with the circulating pump switched on. The air blower ball valve must be closed when the circulating pump is running.

Select options

Type 2 – Nexus Overflow / Universal By-Pass Kit
£139.95
Type 2 – Nexus Overflow / Universal By-Pass Kit
£139.95
Type 2 – Nexus Overflow / Universal By-Pass Kit

The Type 2 Overflow / Universal By-Pass Kit allows you to add an overflow pipe to your Nexus 200 and Nexus 300 filtration system, that was manufactured between 2006 and 2009. This kit only contains the components needed to fit an overflow pipe and a lid.
(For Nexus manufactured between 2006 – 2009)

Add to cart
Out of Stock
Tempest Waste Valve Assembly
£15.95
Tempest Waste Valve Assembly
£15.95
Tempest Waste Valve Assembly

Read more
Tempest Stainless Steel Brackets
£34.95
Tempest Stainless Steel Brackets
£34.95
(Sold as a pair)

Add to cart
Superfish Pressure Filter
£137.52 – £206.16
Superfish Pressure Filter
£137.52 – £206.16
The TopClear 5000 a complete 3-in-1 kit with a matching pump. The TopClear 5000 Kit is equipped with the Pond-Flow ECO 2500 pump, with a 7 watt UVC Built In.
The TopClear 10000 a complete 3-in-1 kit with a matching pump. The TopClear 10000 Kit is equipped with the Pond-Flow ECO 3500 pump, with a 9 watt UVC Built In.
The TopClear 15000 a complete 3-in-1 kit with a matching pump. The TopClear 15000 Kit is equipped with the Pond-Flow ECO 5000 pump, with a 11 watt UVC Built In.
Filter foam provides the mechanical filtering.
Bacteria in the bio-balls provide the biological purification.
Built-in UVC provides control of algae and works to prevent against diseases.

Select options This product has multiple variants. The options may be chosen on the product page
Out of Stock
Pontec Multiclear Set 5000
£116.99
Pontec Multiclear Set 5000
£116.99
Pontec Multiclear Set 5000

Guarantees clean and healthy water- the compact complete flow-through filter set for ponds up to 5000 litres!
The set consists of:

Multi-chamber flow-through filter with several filter media
Integrated UVC clarifier
Powerful filter pump
Filter hose

Product highlights at a glance:

Ideal for ponds up to 5000 l without fish stock / 2500 l with fish stock
Including filter pump with 1500 l/h
Displacement of coarse debris up to 4 mm in size
Integrated 7 watt UVC clarifier
3 m vacuum hose
Including Pontec quality promise: 2 year guarantee
Including Clear Water Guarantee!

Ready-to-connect and complete, this compact flow-through filter ensures guaranteed clear, healthy and clean water in your pond. The integrated UVC clarifier effectively eliminates suspended algae and turbidity.
The 4 different filter media of the multi-chamber filter – Japanese filter mat, coarse and fine filter sponge and bio-surface element – as well as 2 flow-regulating partition walls, support in this regard!

Read more
Out of Stock
Pontec Multiclear 8000
£111.99
Pontec Multiclear 8000
£111.99
Pontec Multiclear 8000

Guarantees clean and healthy water- the compact complete flow-through filter set for ponds up to 8000 litres!
The set consists of:

Multi-chamber flow-through filter with several filter media
Integrated UVC clarifier

Product highlights at a glance:

Ideal for ponds up to 8000 l without fish stock / 4000 l with fish stock
Displacement of coarse debris up to 4 mm in size
Integrated 11watt UVC clarifier
Including Pontec quality promise: 2 year guarantee
Including Clear Water Guarantee!

Read more
Nexus Upgrade Kits
£359.95 – £419.95
Nexus Upgrade Kits
£359.95 – £419.95

Easily upgrade Nexus filters post 2006

Evolution Aqua have made it possible to upgrade previous models of the Nexus filtration system to incorporate the new and improved features that are present on the current Nexus 220 and 320. The upgrade Kits are available in two versions for either the Nexus 210 or Nexus 310 bodies.

You can upgrade the four Nexus filters manufactured post 2006, pictured below

Use the Nexus 220 / 320 Upgrade Kit

The Nexus 220 and 320 Upgrade Kit upgrades the EAZY in Nexus filtration systems manufactured between 2006 and 20014, to the very latest EAZY used in the 220 and 320. This kit contains all the components you need to make this upgrade.

• Easily convert your Nexus 210 or 310 with the brand new EAZY

• Benefit from improved mechanical filtration and flow with

• New EAZY has a more efficient pattern of slots allowing better flow

• EAZY can be removed if needed with K1 Micro media in place

Select options This product has multiple variants. The options may be chosen on the product page
Nexus Automatic Upgrade Kit 220/320 (Gravity Fed)
£659.95 – £695.95
Nexus Automatic Upgrade Kit 220/320 (Gravity Fed)
£659.95 – £695.95

Make Nexus the automatic choice

Continuing our long standing reputation for innovation, the Nexus Automatic System now enables Nexus owners to benefit from a fully automated cleaning cycle on their multi award winning Nexus filtration systems. Physically turning ball valves and manually switching pumps on and off will now be a thing of the past thanks to the Nexus Automatic System. All of the key processes that form the cleaning cycle are now controlled automatically with this easy to install kit.

Gravity Fed Setups

Overview

The Nexus Automatic System can be installed on Nexus 220 and
320 filters manufactured after 2006, whether on gravity-fed or
pump-fed installations.
The kit includes a control box which connects up to an automated
waste valve, airpump control box and an automatic inlet slide plate
(for gravity fed models only). Once installed and connected to your
pond pump and mains power the system will carry out cleaning
cycles at timed intervals or when pressing the manual clean button.

Cleaning Cycle

The Nexus Automatic System will control the cleaning cycle fully automatically. Cleaning is done on a timer, which is factory set to clean once every 3 days, however, this is easily adjustable to fit in with your pond requirements. The Nexus Automatic System will run a cleaning cycle which lasts approximately 10 minutes.

Gravity Fed Cleaning Cycle

■ Adjustable timer kicks in to start a cleaning cycle.

■ Control box automatically switches circulating pump off.

■ The water level in the Nexus equalises.

■ Inlet valve closes whilst at the same time air is diverted from the outer bio chamber to the EAZY to clean the media.

■ After the media has been cleaned, the waste valve opens.

■ EAZY is drained to waste and inlet valve opens for a final flush of the EAZY.

■ The waste valve closes.

■ Air is diverted back from the EAZY to the bio chamber.

■ Circulating pump is switched back on.

■ Nexus returns to filtration mode.

The generally accepted practice is that when you keep ornamental fish, whether in a pond or in an aquarium, to keep the water fresh, 10% of the volume of the water in the pond/aquarium should be changed on a weekly basis. With this in mind, we recommend that you set your Nexus Automatic system to run a cleaning cycle so as to exchange water in line with this.general parameters of our ponds is turn over rate. This is the time that it takes for the total volume of the pond to pass through the filter system once. We recommend that for ideal performance a turn over rate of every 2 to 3 hours is found to be best.

Select options This product has multiple variants. The options may be chosen on the product page
Nexus Automatic Upgrade Kit 220/320 (Pump Fed)
£549.95
Nexus Automatic Upgrade Kit 220/320 (Pump Fed)
£549.95

Make Nexus the automatic choice

Continuing our long standing reputation for innovation, the Nexus Automatic System now enables Nexus owners to benefit from a fully automated cleaning cycle on their multi award winning Nexus filtration systems. Physically turning ball valves and manually switching pumps on and off will now be a thing of the past thanks to the Nexus Automatic System. All of the key processes that form the cleaning cycle are now controlled automatically with this easy to install kit.

Pump Fed Setups

Overview

The Nexus Automatic System can be installed on Nexus 220 and
320 filters manufactured after 2006, whether on gravity-fed or
pump-fed installations.
The kit includes a control box which connects up to an automated
waste valve, airpump control box and an automatic inlet slide plate
(for gravity fed models only). Once installed and connected to your
pond pump and mains power the system will carry out cleaning
cycles at timed intervals or when pressing the manual clean button.

Cleaning Cycle

The Nexus Automatic System will control the cleaning cycle fully automatically. Cleaning is done on a timer, which is factory set to clean once every 3 days, however, this is easily adjustable to fit in with your pond requirements. The Nexus Automatic System will run a cleaning cycle which lasts approximately 10 minutes.

Pump Fed Cleaning Cycle

■ Adjustable timer kicks in to start a cleaning cycle.

■ Control box automatically switches circulating pump off.

■ The water level in the Nexus equalises

■ Air is diverted from the outer bio-chamber to the Eazy to clean the media.

■ After the media inside the Eazy has been cleaned, the automated waste valve opens.

■ Eazy is drained to waste.

■ The automated waste valve closes.

■ Air is diverted back from the Eazy to the biochamber.

■ Circulating pump is switched back on.

■ Nexus returns to filtration mode.removed if needed with the K1 Micro in place. This added feature is ideal when undertaking further maintenance.

The generally accepted practice is that when you keep ornamental fish, whether in a pond or in an aquarium, to keep the water fresh, 10% of the volume of the water in the pond/aquarium should be changed on a weekly basis. With this in mind, we recommend that you set your Nexus Automatic system to run a cleaning cycle so as to exchange water in line with this.general parameters of our ponds is turn over rate. This is the time that it takes for the total volume of the pond to pass through the filter system once. We recommend that for ideal performance a turn over rate of every 2 to 3 hours is found to be best.

Add to cart
Nexus 320/310 Lid
£124.95
Nexus 320/310 Lid
£124.95
Lid to cover the Nexus 320 and Nexus 310

New Style in Black and accommodates the Nexus Auto Kits. Please contact us for an up to date image

Add to cart

NEXUS 320+ FREE SHIPPING

£1,595.00

NEXUS 320+ FREE SHIPPING

£1,595.00

FREE SHIPPING

Evolution Aqua have launched the Nexus 320+filtration systems. Building on the tried and tested technology that has been ever present in the world renowned Nexus, the team at Evolution Aqua have gone even further to enhance their number one Koi pond filter.

The Nexus 320+ filters now come with a new filter media called K+Media in the moving bed outer chamber for vastly improved biological filtration and faster filter maturation. The new Nexus+ filters are also supplied “auto ready”, with factory fitted fixings already in place, making it even easier to upgrade to the Nexus Automatic Cleaning System.

Faster filter maturation and unrivalled water clarity

Maximum pond size: 34,000 litres / 7,500 gallons
Recommended flow rate:11,000 litres per hour
Maximum flow rate:13,000 litres per hour
Volume of water in Nexus:840 litres
Amount of K1 Micro in EAZY:20 litres
Amount of K+Media supplied:100 litres
Maximum amount of K+Media:300 litres

How the Nexus+ Works

The Nexus+ filter is an innovative biological and mechanical filter system in one. Water from the pond enters the Nexus+ via the inlet into the inner chamber which works as a vortex allowing larger solids to settle out. The water then passes through Eazy filter, where finer particles are removed at the mechanical stage of filtration, thanks to the static bed of K1 Micro filter media.

The mechanically clean water then passes to the outside chamber of the Nexus+ where the new K+Media Moving Bed is located for biological treatment prior to being returned to the pond. At this stage, biological breakdown occurs through different strains of bacteria and filter feeders living on the vast protected surface area of each piece of the K+Media. These bacteria convert Ammonia and Nitrite into less harmful Nitrate. Water then passes through the exit grill into the outlet, returning back to the pond.

Nexus+ Dimensions

Installing the Nexus+

The Nexus+ MUST be installed on a solid, level base, a minimum of 1.2 metres x 1 metre. Failure to do this will cause irreparable damage to the filter and will therefore invalidate your warranty.

GRAVITY-FED INSTALLATIONS

By this we mean that your pump is going to be used to return the filtered water to the pond and therefore your filter will be supplied by gravity via a larger diameter pipe. In this situation the water level in the filter will be at the same level as the pond.

PUMP-FED INSTALLATIONS

By this we mean that if your pump is going to be used to supply the water to the filter, and the filtered water then returns back into your pond via gravity, i.e. down a waterfall, or through a large diameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump).

Model	Max Pond Size	Max Flow Rate	Volume of Water in Nexus	Amount of K1 Micro in Eazy Chamber	Amount of K+Media supplied in Bio-chamber	Max Capacity for K+Media
	18,000 litres 4,000 UK Gallons 4,800 US Gallons	10,000 litres/hour 2,200 UK Gallons/hr 2,640 US Gallons/hr	510 litres 112 UK Gallons 135 US Gallons	18 litres of K1 Micro inside the Eazy	50 litres of K+Media in the bio-chamber	150 of K+Media in the bio-chamber
	34,000 litres 7,500 UK Gallons 9,000 US Gallons	13,000 litres/hour 2,859 UK Gallons/hr 3,431 US Gallons/hr	840 litres 185 UK Gallons 222 US Gallons	20 litres of K1 Micro in the Eazy	100 litres of K+Media in the bio chamber	300 litres of K+Media in the bio chamber

New advanced filtration media

Plastic media, for use in biological pond filters – specifically in moving bed bio reactors, was pioneered by Evolution Aqua, some 20 years ago. In recent years, other plastic media have come onto the market, usually with the aim of trying to get more and more surface area. However, one drawback to using plastic media has always been the time it takes to establish a stable biofilm – essential for good filtration.

After many years of research, Evolution Aqua have now developed a new media that not only gives class leading surface area, but also overcomes the problem of long maturation times.

K+Media is designed and manufactured in the UK by Evolution Aqua. This advanced media, with its innovative design, and class leading surface area provides enhanced biological and mechanical filtration.

As Evolution Aqua extrude K+Media, Minerals and Enzymes are added to the raw material. The result of this process, unique to Evolution Aqua, is a filtration media that not only outperforms most of its competitors due to its large protected surface area, but also answers the problem of how to speed up the time taken to mature your filter.

During the extrusion process, Evolution Aqua add a range of minerals, along with magnesium, calcium, enzymes and salt to the raw material that is used to manufacture K+Media. The result means that K+Media will mature much faster than many other types of media.

– The addition of these minerals creates a rough surface on the media. This textured surface has a microscopic honeycomb of peaks and craters that allow waste particles to collect, and nitrifying bacteria to form.

– The minerals act as a food source for the bacteria, helping the bacteria to develop and multiply at a faster rate, further improving maturation times.

– Calcium alone has proven advantages for developing and maintaining effective bio-films.

– The enzymes that are added also help to make the media “sticky” so waste particles can adhere to media easier.

– Salt is added during the extrusion process, which is dissolved during the cooling process, leaving a rough surface on which bio-film can easily adhere.

Stable bio-film development

The shape of K+Media optimises the amount of “quiet zones” within the media where a stable bio-film can develop. Whilst K+Media keeps the integral profile of K1 Media at its core, there is an extra layer of cells and fins around the outside of each piece that enable microscopic organisms such as Rotifers and Vorticella to thrive. This is an additional benefit as competitor media do not have such “quiet zones” that would allow these higher lifeforms of filter feeders to develop. The bacteria and organisms that form within the bio-film ensure the media delivers optimum levels of biological filtration in the moving bed, which has been proven filtration technology for many years in the fishkeeping hobby.

Add to cart

Approved Dealer for:

Search by category

Search

Search

Clear

K+ Advanced Filter

Advanced pressure filters for ponds using K+Media

Key Features

Pressure Filters Specifications

Manufactured to Last

Best-in-Class Filtration Media

Peace of Mind

Economical to Run

Easy as 1-2-3

How K+Advanced Filters work?

How to install K+Advanced Filters?

How to install K+Advanced Filter On A Skimmer Line?

Useful Information

Type 2 – Nexus Overflow / Universal By-Pass Kit

Tempest Waste Valve Assembly

Tempest Stainless Steel Brackets

Superfish Pressure Filter

Pontec Multiclear Set 5000

Pontec Multiclear 8000

Nexus Upgrade Kits

Easily upgrade Nexus filters post 2006

You can upgrade the four Nexus filters manufactured post 2006, pictured below

Use the Nexus 220 / 320 Upgrade Kit

Nexus Automatic Upgrade Kit 220/320 (Gravity Fed)

Make Nexus the automatic choice

<iframe src="https://www.youtube.com/embed/Dcu1cfg_Ivo" height="315" width="560" allowfullscreen="" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" frameborder="0"></iframe>

Gravity Fed Setups

Overview

Cleaning Cycle

Gravity Fed Cleaning Cycle

Nexus Automatic Upgrade Kit 220/320 (Pump Fed)

Make Nexus the automatic choice

<iframe src="https://www.youtube.com/embed/Dcu1cfg_Ivo" height="315" width="560" allowfullscreen="" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" frameborder="0"></iframe>

Pump Fed Setups

Overview

Cleaning Cycle

Pump Fed Cleaning Cycle

Nexus 320/310 Lid

NEXUS 320+ FREE SHIPPING

Advanced filtration systems for Koi ponds now with NEW K+Media

Faster filter maturation and unrivalled water clarity

How the Nexus+ Works

Nexus+ Dimensions

Installing the Nexus+

PUMP-FED INSTALLATIONS

Specifications

New advanced filtration media

Increased surface area

Stable bio-film development

Use with PURE Pond products